Impact Factor
7.883
Call For Paper
Volume: 11 Issue 05 May 2025
Download Paper Format
Copyright Form
LICENSE
Under License of
Creative Commons Attribution-NonCommercial 4.0 International LicensConference : Special Issue 2016
AUTOMATIC BRAKE FAILURE DETECTION WITH AUXILARY BRAKING SYSTEM
Mechanical Engineering
Now A Day, Machines Are Widely Controlled By Control System. To Meet The Need Of Exploding Population Economic And Effective Control Of Machines Is Necessary. The Aim Is To Design And Develop A Control System Based An Electronically Controlled Automat
Author: Prof. Pandit Biradar | Jitendra Baravkar | Komal Bhujbal | Avi Bhapkar
Read MoreCONSTRUCTION DETAILS AND SAFETY FEATURES OF FASTEST MODE OF TRANSPORTATION ‘HYPERLOOP’
Mechanical Engineering
Hyperloop Is A New Transportation Technology Which Uses A Capsule To Travel From One Place To Another Inside A Tube. The Pod Or Capsule Travels With Speed Of Almost 1000 Km/hr. Which Is Equal To Speed Of Sound. This Means Travelling From Pune To Delhi
Author: Saurabh Jadhav
Read MoreDESIGN AND FABRICATION OF WHEELCHAIR-TO-BED SYSTEM USING FLUID POWER
Mechanical Engineering
Wheelchair Is A Chair With Wheels Used To Move A Person/patient From One Location To Another Due To Their Inability To Move. This May Be Due To The User/patient Being Physically Disabled, Weakness Due To Their Disease Or Old Age. Hence After They Arri
Author: Kulkarni S. B | Thakare A. J | Tamann S. H | Roman G. S, Karankoti S. V
Read MoreREVIEW ON GYRATORY MECHANISM OF SPRAYING MACHINE FOR CYLINDRICAL CASE
Mechanical Engineering
The Role Of A Liner Spraying Machine Is To Spray The Liner Material On The Interior Surface Of The Cylindrical Case. The Attention Must Be Given To The Consistency Of The Thickness Of The Spraying Material. The Present Machine Used Is Stodgy As Not Mu
Author: Patil P. S. | Tayade H. P. | Mann B. S. | Malpure S. T., Shinde V. V.
Read MoreA MODEL FOR ELECTRICITY GENERATION BY FAST MOVING VEHICLE
Mechanical Engineering
As The Population Increases Day By Day The Demand Of Energy Sources Also Increasing And Due To Use Of Nonrenewable Energy Sources Pollution Is Also Increasing. The Availability Of Them Is Also Limited. So, We Need To Find Alternative Sources Which Can
Author: Prof. Wankhede S. V | Mr. Khedkar D. A | Mr. Limaje T. A | Mr. Khedkar D. S, Mr. Mahajan V. D
Read MoreFATIGUE LIFE ESTIMATION OF AN ALUMINIUM WHEEL RIM USING FINITE ELEMENT ANALYSIS
Mechanical Engineering
In This Era, There Is A Call For Sustainable Designs With Higher Life Expectancy And So Automotive Industry Demands Flawless Wheel Rims. The Paper Deals With The Design Of Aluminium Wheel Rim For Automobile Application. The Fatigue Life Estimation By
Author: Mandage A. P. | Sharma M. H. | Rayate A. K. | Kange P. N., Hirulkar N. S.
Read MoreEDDY CURRENT DYNAMOMETER FOR HYDROGEN ENGINE
Mechanical Engineering
Power, Speed And Torque Are The Very Important Parameter When Engine Is About To Be Analysed. Thus While Developing Hydrogen Engine Test Rig The Measurement Of Power And Torque By The Engine Is Defined. To Carry Out This Calculation We Must Possess A
Author: Mr. Patil A. R | Mr. Patil D. M | Mr. Pawar L. S | Mr. Povhane D. P, Prof. Jawale P. P
Read MoreDESIGN AND MODELLING OF AUTOMATED SHED FOR VEHICLE PROTECTION AND SPACE UTILISATION
Mechanical Engineering
The Proliferation In The Number Of Vehicles Has Led To Increase In Parking Problems. This Is Due To The Fact That The Current Transportation Infrastructure And Car Park Facility Developed Are Unable To Cope With The Influx Of Vehicles. This Problem Pe
Author: Kumbhare R.K. | Loharkar A. B. | Aher R. S. | Ghadge P. D., Chaudhari B. R.
Read MoreREDUCING MAJOR DEFECTS IN RADIATORS MANUFACTURING
Mechanical Engineering
Radiators Are Heat Exchangers Used To Transfer Thermal Energy From One Medium To Another For The Purpose Of Cooling And Heating. While Manufacturing Many Defects Occurs .The Aim Of This Paper Is To Apply The Quality Tools To Find Out The Root Causes O
Author: Kumar P. | Sonawane B. S. | Sontakke R. R. | Surve S. B., Wasnik A. R.
Read MoreSAFETY OF ALL TERRAIN VEHICLE USED IN AGRICULTURAL FIELD: A REVIEW
Mechanical Engineering
All-Terrain Vehicles (ATV) This Are Day By Day Popular For Both Recreational And Work Applications. In Some Countries All Terrain Vehicles Are Widely Used In The Farming Environment. Recent Statistics Have Indicated That High Serious-injury And Fatali
Author: Salunkhe S. B | Tawar N. S | Choudhary P. L | Kumar D. A, Mehta A.T
Read MoreDESIGN AND FABRICATION OF MULTIPURPOSE AGRICULTURE EQUIPMENT
Mechanical Engineering
India Is An Agricultural Country Cultivating More Number Of Ground Nuts, Corns, Cereals Etc., In The Village Sides Of The Country. The Available Automatic Machines Are Imported From Foreign Countries. The Imported Machines Are Not Only Bulk In Size Bu
Author: Mr. Thange R. B | Mr. Ugale A. G | Mr. Zatale S. V | Ms. Thorve N. N, Prof. Dhavane S. P
Read MoreDESIGN AND MODELLING OF AUTOMATIC AIR FILLING SYSTEM IN TIRE OF CAR
Mechanical Engineering
Driven By Studies That Show That A Drop In Tire Pressure By Just A Few PSI Can Result In The Reduction Of Gas Mileage, Tire Life, Safety, And Vehicle Performance, We Have Developed An Automatic, Self-inflating Tire System That Ensures That Tires Are P
Author: Gaikwad. S. B | Deshmukh. R. B | Amte. S. A | Bansode. S. D, Saddu. S. C
Read MoreDESIGN OF COCONUT RANCIDITY TESTING MACHINE
Mechanical Engineering
In Day To Day Life Coconut Product Has Various Uses, So It Is Important To Test Rancidity Of Coconut Before Processing The Coconut. The Rancid Coconuts Are Not Useful For Food Industries As Coconut Processing Line Stops. Hence It Is Become Very Import
Author: S.C.Saddu | D. M. Gavhande | S. L .Gengaje | S. R. Ghate, A. G. Holkar
Read MoreDESIGN AND FABRICATION OF HYBRID HYDROGEN GASOLINE KIT: A REVIEW
Mechanical Engineering
Conventional Spark Ignition (SI) Engine Uses Gasoline Primarily As A Fuel, But The Emissions From This Engine Are Harmful For The Environment. In This Paper, The Use Of Hydrogen Is Promoted As A Primary Fuel And Gasoline As The Secondary. The Main Aim
Author: Karankoti S. V. | Marathe Y. S | Kulkarni S. D. | Manthale V. C. , Mahajan P. C.
Read MoreDESIGN, ANALYSIS AND FABRICATION OF PNEUMATIC BELT CONVEYOR SYSTEM
Mechanical Engineering
Pneumatic Conveying System Is A Conventional Material Handling System Like Belt Conveyor. The Main Advantage Of Pneumatic Belt Conveying System Is That Material Is Transferred In Close Loop, Thereby Preventing The Environmental Effect On The Material
Author: Meshram S. R | Beldar M. R | Mungase A. A | Patil P. V, Patil A. N
Read MoreVARIOUS TECHNIQUES AND CHALLENGES OF HYDROGEN STORAGE: A REVIEW
Mechanical Engineering
With Increase In Human Population Present Day Situation Has Constrained Us To Face Dual Problems Of Fossil Fuel Depletion And Environmental Degradation Simultaneously. The Researchers Are Working Towards Finding Out The Best Replacement For The Fossil
Author: Rushikesh Mahandule | Akshay Khandave | Kuldeep Raj | Karankoti S. V. , Chougule M. N
Read MoreDESIGN AND MANUFACTURING OF SIX AXIS ROBOTIC ARM
Mechanical Engineering
Six-axis Industrial Robots Are One Of The Most Powerful Tools Available Today. This Type Of Robots Performs A Wider Range Of Applications With Greater Flexibility. In Their Simplest Terms They Consist Of Two Units; The Robotic Arm And The Control Syst
Author: Mr. Patil B.J. | Mr, Panchal J. G. | Mr. Karle S. N. | Mr.Goyal K. P. , Prof.Lakal N. V.
Read MoreDESIGN AND DEVELOPMENT OF MANUALLY OPERATED SEED SOWING MACHINE
Mechanical Engineering
Today’s Era Is Marching Towards The Rapid Growth Of All Sectors Including The Agricultural Sector. To Meet The Future Food Demands, The Farmers Have To Implement The New Techniques Which Will Not Affect The Soil Texture But Will Increase The Overall C
Author: Gaherwar N. B. | Funde S. B. | Kale A. R. | Kadam O. B. , Lokhande S. N.
Read MoreDESIGN AND FATIGUE LIFE ESTIMATION OF A PRESSURE VESSEL USING FINITE ELEMENT ANALYSIS
Mechanical Engineering
Conventional Design Aims At Finding Acceptability Design Which Merely Satisfies The Functional Other Requirements Of The Problem. This Paper Deals With The Design Of Pressure Vessel. The Fatigue Life Estimation Is Carried Out To Analyse Stress Distrib
Author: Patel V. S, | Jaroli A. R | Jawale Y. A | Utekar A. P, Dabade S. G
Read MoreDESIGN AND FABRICATION OF AUTOMATIC CENTRE STAND OPERATED BY POWER SCREW
Mechanical Engineering
The Paper Deals With Continuous Improvement In Design Which Leads To Development Of Current Structural Design To Reduce Human Efforts. The Present Design Of Centre Stand Or Main Stand Of Two Wheeler Is Manually Operated. In Order To Park Two Wheeler O
Author: N. S. Hirulkar | V. S. Kamble | R. K. Buwa | A. R. Badar, S. J. Wadghane
Read MoreDESIGN AND FABRICATION OF SOLAR ELECTRIC TYPE AGRICULTURAL SPRAYER
Mechanical Engineering
Now A Day’s Energy Demand Is The Great Challenge For, Engineers, Entrepreneurs And Industrialist Of Our Country. According To Them, Applications Of Non Conventional Energy Is The Only Alternate Solution For Conventional Energy Demand. The Concept And
Author: Vishal Holkar | Akshay Dhanvate | Abhijit Borde | M. N. Chougule
Read MoreAUTOMATIC SEED SOWING MACHINE
Mechanical Engineering
Manual Method Of Seed Planting, Results In Low Seed Placement, Spacing Efficiencies And Serious Back Ache For The Farmer Which Limits The Size Of Field That Can Be Planted. The Cost Price Of Imported Planters Has Gone Beyond The Purchasing Power Of Mo
Author: Aniket Antre | Dhananjay Borde | Mayur Belote | Akash Deshmukh, M. N. Chougule
Read MoreANALYSIS OF A FATIGUE CRACK IN SPUR GEAR
MECHANICAL ENGINEERINGechanical Engineering
Gears Are Commonly Used For Transmitting Power And Motion. An Effective Gear Design Balances Strength, Durability, Reliability, Size, Weight And Cost. The Engineering Structures May Fail Due To Crack, Which Depends On The Design Of Gear, Material Used
Author: Patil P. S. | Mali K. S. | Lakal N. V | Mohite M. A.
Read MoreANALYSIS OF FATIGUE PERFORMANCE OF SINGLE CYLINDER IC ENGINE-A REVIEW
Mechanical Engineering
The Crankshaft Is A Component Which Is Of Prime Importance To An Engine. The Function Of Crankshaft Is To Convert The Reciprocating Displacement Of The Piston Into A Rotary Motion. The Major Cause Of Failure Of Crankshaft Is Fatigue Resulting Into Cra
Author: Prof. S. V. Wankhede | S. Rothe | K. Kulkarni | B. Shinde, S. Patil
Read MoreDESIGN OF SOLAR AERO-MODEL
Mechanical Engineering
During The Oil Crisis In The 1970s, Solar Energy Utilized Via Photovoltaic Cells Was Recognized As An Alternative Energy Source For Humans. However, Interest On Solar Energy Declined As The Price Of Oil Decreased. At Present, The Clamor To Reduce The
Author: S. V. Deokar | Salunke S. S. | Said S. K. | Rathod S. B, Pawar O. T.
Read MoreDEVELOPING A SYSTEM HAVING ZERO TURN MECHANISM
Mechanical Engineering
Modern Development And Economical Progression Of Indian Society Resulted In Increase Of Cars On Roads. Due To Space Constraints, Car Parking Is The Major Problem Faced In Most Parts Of Country. Present Study Aims For Development Of A System To Reduce
Author: M. K. Deshmukh | S. T. Gaikwad | A. B. Gala | D. N. Borse, P. E. Lokhande
Read MoreDesign and Development of Fuel Cell Electric Bicycle.
Mechanical Engineering
The Design, Fabrication And Testing Of A Prototype Of Fuel Cell Electric Bicycle Powered By A Proton Exchange Membrane Fuel Cell (PEMFC) Is Reported. A Fuel Cell Electric Bicycle (FCEB) Is A Type Of Electric Vehicle That Uses A Fuel Cell To Power Its
Author: Bhagwat S. K. | Bhilare P. V. | Darade V. A. | Dongare B. J, Puranik L. P.
Read MoreANALYSIS OF A SPRING LOADED INTERCONNECTED HYDRO-PNEUMATIC SUSPENSION OF A VEHICLE
Mechanical Engineering
In 1950, Hydro-pneumatic Suspensions Were Used In Vehicle To Increase The Ride Comfort Due To Nonlinear Property Of Oil And Air. But Due To The Sizes Of Struts Unreasonably Large Further, The Pressures Were Also Unreasonably High Resulting In Seal Dam
Author: Dhage A. C. | Sawant N. B. | Bansode S. N. | Shaligram A. A., Mohite M. A.
Read MoreDESIGN OF MAGNETICALLY LEVITATED VERTICAL AXIS WIND TURBINE
Mechanical Engineering
Non-renewable Sources Of Energy Like Coal, Crude Oil Etc. Is On The Verge Of Depletion. It Also Adds To Various Forms Of Pollution. To Meet An Increasing Demand Of Energy It Is Necessary To Innovate New Ways To Effectively Harness Renewable Sources Of
Author: Kulkarni P.D. | Sharma A. | Khanke A. D. | Vishwakarma C., Choudhary M. H.
Read MoreA CRACK DETECTION SYSTEM DEPLOYED BY AN UNDERWATER ROVING VEHICLE
Mechanical Engineering
This Project Proposes A Robotic System For Searching Cracks In Bridges And Submerged Underwater Structures (metallic Or Concrete). This Robotic System For Structure Inspection Has Been Developed With The Aim Of Checking The Safety Status Of A Real Bri
Author: S. G. Dabade | Prashik Lanjewar | Aditya Mandlik | Maheep Sharma, Kumbha Singh
Read MoreTHREE POINT BENDING ANALYSIS OF HONEYCOMB SANDWICH PANELS: EXPERIMENTAL APPROACH
Mechanical Engineering
Recent Trends In Modern Railway Industry Shows More And More Use Of Composites Specially Sandwich Structures To Build The Coaches So As To Achieve Higher Speeds, Reduced Power Consumption And Increase In Pay Load Carrying Capacity. Honeycomb Sandwich
Author: Kuldeep P. Toradmal | Shrishail Sollapur | Shweta Wange | Vikram Pawar
Read MoreTURNING PROCESS PARAMETERS OPTIMIZATION OF MILD STEEL USING ADVANCED OPTIMIZATION TECHNIQUES
Mechanical Engineering
The Rapid Advancement In Production Technologies Needs Development Of Manufacturing Processes Which Initiates By Optimization To Scrutinize Feasibility Of Modifications. Turning Process Is Widely Used For Material Removal Because It Has Higher Product
Author: Mr. P. H. Lalge | Govind M. P. | Ingule S. S. | Gharate C. S., Ganage G. D.
Read MoreENHANCING MECHANICAL PROPERTIES OF POLYPROPYLENE/OMMT BY ADDING SEBS
Mechanical Engineering
In Recent Years Incredible Research Has Been Done On Polymer Nanocomposite Since These Materials Demonstrated Excellent Properties. Nanocomposite With Enhanced Mechanical Properties Such As Toughness And Stiffness Can Serve As Perfect Replacement For
Author: Pawar A. V | Vibhute A. V | Daware D. B | Nek Ranjan, Lokhande P. E
Read MoreREDESIGNING OF MATERIAL HANDLING SYSTEM AND LAYOUT ANALYSIS
Mechanical Engineering
Carriers Are Used For Transportation Of Components. It Is A Vertically Shaped Profile Which Comprises Of Three Rods Which Are Connected To Each Other To Support Three Rectangular Profiles. Components Are To Be Mounted On Rectangular Profiles. Out Of T
Author: Mr. P. H. Lalge | Mr. P. G. Lawate | Mr. A. P. Chougule, Mr. P. S. Shalgaonkar | Mr. S. S. Mahalle, Dr. Sachin. K. Patil
Read MoreINCREASING THE EFFICIENCY OF THE TURNTABLESYSTEM
Mechanical Engineering
It Is Very Important In Steel And Metal Industries To Transfer Ingots From One Place To Another. The Turntable System Is Such A Mechanism That Assists The Transfer And Provides Direction To The Trolleys Which Contain Heavy Machinery And Raw Materials
Author: H. A. Shah | S. Y. Shaikh | G. S. Phadtare | R. N. Poreddiwar, V. V. Gaikwad
Read MoreCHARACTERIZATION AND MICRO STRUCTURAL STUDY OF STEEL 304 TO ANALYZE THE PROPERTY VARIATION AFTER CNC MILLING
Mechanical Engineering
SAE 304 Is Austenite Stainless Steel Also Known As A2 Or 18/8 Stainless Steel. It Is Non-magnetic And It Has High Corrosion Resistance Than Regular Steel And Can Be Formed In Various Shapes. The Different Applications Of This Steel Are For Various Hou
Author: Arjun Abhyankar | Pratik Jadhav | Avinash Kumar | Devesh Deshmukh, M. W. Bhalwankar
Read MoreOPTIMIZATION OF BEAD GEOMETRY PARAMETERS OF ELECTRON BEAM WELDING USING ADVANCED OPTIMIZATION TECHNIQUES
Mechanical Engineering
The Welding Processes Are Used To Get The Welded Joint Of Desired Weld Bead Geometry, Excellent Mechanical Strength And Minimum Distortion. The Input Parameters Of Welding Process Play Very Substantial Role To Determine The Quality Of A Weld Joint. Th
Author: Abhinaw Kumar | Ugale S. N | Solanki A | Mohit Kumar, Kamble A. G.
Read MoreOPTIMIZATION OF JOB SHOP SCHEDULING PROBLEM USING JAYA ALGORITHM
Mechanical Engineering
Optimization Algorithms Are Search Methods Where The Goal Is To Find An Optimal Solution To A Problem In Order To Satisfy One Or More Objective Functions Which Are Possibly Subjected To A Set Of Constraints. In This Study, A Recently Developed Jaya Al
Author: Shah H. K. | Raj Abhishek K. | Mehta A. A. | H. S. Keesari
Read MoreREVIEW OF DESIGN OF HYBRID ALUMINIUM / COMPOSITE DRIVE SHAFT FOR AUTOMOBILE
Mechanical Engineering
In Current Market, Drive Shaft Is The Most Important Component To Any Power Transmission Application; Automotive Drive Shaft Is One Of This. A Drive Shaft, Also Known As A Propeller Shaft Or Cardan Shaft, It Is A Mechanical Part That Transmits The Tor
Author: Mandar Deo | Piyush Chavan | Varun Chippa | Saisha Dalvi, Nikhil Chavan
Read MoreEXPERIMENTAL INVESTIGATIONS OF BIAS ERRORS OF AN ULTRASONIC FLOW METER ON SLOPED PIPELINES
Water And Power Research
Precision In Flow Measurement Has Economic Consequences And Also Necessitates Fulfilment Of Stipulated Requirement Of Straight Length Upstream And Downstream Of Flow Meter. However, Many Times, The Site Constraints Do Not Permit To Fulfil This Require
Author: K.Kumar | V.B.Shinde | S.T.Wagh,N.A.Gaikwad | P.S.Thengal, S.V.Jamale
Read MoreDEVELOPING A PROGRAM FOR THE DESIGN OF A SOLAR PHOTOVOLTAIC SYSTEM FOR VACCINE STORAGE
Mechanical Engineering
It Is Observed That At Many Locations Vaccines Are Damaged Because Of The Non-availability Of Electricity For Longer Periods. Government Has Supplied With Electricity Operated Vaccine Storage Unit (ILR- Ice Lined Refrigerator) For Public Health Care C
Author: Shweta Subramanian | Pankaj Gode
Read MoreEVAPORATIVE COOLING TECHNIQUE FOR DOMESTIC REFRIGERATOR
Mechanical Engineering
In Day To Day Life Importance Of Refrigeration Increasing In India, So We Have To Increase Cop Of Refrigeration. In This Paper We Analyze About Evaporative Cooling To Implement In Refrigeration. Due To More Heat Rejected In Condenser Evaporative Coole
Author: Dhas Sharad | Dhuke Mangesh | Dhas Surendra | Ghuge Sandip
Read MoreDESIGN AND ANALYSIS OF POROUS RECTANGULAR FINS FOR EXPERIMENTAL INVESTIGATION UNDER FORCED CONVECTION
Mechanical Engineering
In Design And Analysis Of Porous Rectangular Fins For Experimental Investigation Under Forced Convection, Designing And Analysis Of Rectangular Fin Array Is Carried Out Under Forced Convection, Modification Of The Same Array Is Done To Increase Effect
Author: Mr. Dolas S.P | Mr. Biradar B.R | Mr. Patil D.R | Mr. Khedekar Y.S,Prof. Kekan R.H.
Read MoreAUTOMOBILE AIR-CONDITIONING USING MINI-CHANNEL TECHNOLOGY IN EVAPORATOR-A REVIEW
Mechanical Engineering
With The Growing Concerns About Energy Crisis, More Attention Was Drawn To Improve The Efficiency Of The Existing Energy Systems To Reduce The Energy Consumption. A Heat Balance Of An I.C Engine Shows That Only 35-40% Of Heat Energy In The Fuel Is Con
Author: Hase Y.B. | Dhat S.S. | Chavan R.K. | Dongre S.D., Pesode P.A.
Read MoreANALYSIS OF WASTE HEAT DRIVEN AIR CONDITIONING SYSTEM FOR AUTOMOBILE
Mechanical Engineering
Existing Automobile Engine Losses Lots Of Heat Through Exhaust Gas. In This Vapour Absorption System Exhaust Heat Is Used As Heating Source Of Vapour Absorption System. From The Literature It Is Observed That Heat Potential Is Sufficient For Powering
Author: Patil M.V | Patil A.S | Patil P.H. | , Pawar P.D.,Ogale A.P.
Read MoreSOLAR POWERED STIRLING ENGINE
Mechanical Engineering
The Aim Of This Project Is To Design, Build, And Test A Stirling Engine Capable Of Generating Between 200-500 Watts Of Electricity. Here, We Are Using Parabolic Dish Reflectors To Concentrate The Solar Rays On The Hot End Of The Engine. They Have The
Author: A.P.Kanade | V.C.Jain | N.K.Kamble | S.N.Kamlaskar,S.B.Bhoyar
Read MoreHYDROGEN COMPRESSOR USING PEM
Mechanical Engineering
In The World Of Technology, After Decades Of Development Hydrogen Is About To Find Its Way Into The Automobile Sector. Till Date More Than 30 Hydrogen Refuelling Stations Are Installed In The America. The Main Component Of These Refuelling Stations Is
Author: Gaikwad P.S. | Katke S.P. | Lahane S.S. | Mulik P.G, Patil S.G.
Read MoreSEPARATION OF NITROGEN FROM AIR TO REDUCE NOX EMISSION FROM HYDROGEN ENGINE
Mechanical Engineering
The Growing Need To Drastically Reduce CO2 Emissions Has Led Engineers And Scientists To Develop A Clean, Renewable And Sustainable Energy System. Hydrogen As A Green Fuel Is A Good Choice Since It Does Not Emit Any Particulate Like CO And CO2, But It
Author: Aher A.B. | Kenkar A.S. | Kulkarni R.M. | Patil S.G.
Read MoreSC FILTER CLEANING MECHANISMS: A REVIEW
Mechanical Engineering
Self-cleaning Filters Were Developed To Tackle Multiple Problems Plaguing The Conventional Filters Used In Industries. Long Maintenance Hours, Process Equipment’s Downtime And Increased Annual Cost To Name A Few. Theses Filters Were So Effective That
Author: T. K. Dandekar | V.V. Gaikwad | P. K. Singh | S. S. Pusalkar, J. A. Shaikh
Read MoreDevelopment of Smart Street Light System Using Hybrid Energy
Mechanical Engineering
The Objective Of This Paper Is To Show That A Precise Study Of Renewable Energy Potential Is Indispensable Before Implementing A Renewable Energy System. The Growing Demand Of Energy Coupled With Increasing Attention To The Environment Impact Have Fo
Author: S. R .Meshram | Mane G | Sonawane M | Lashkare G, Narawade R
Read MoreExtraction of fuel from plastic waste and its experimental analysis
Mechanical Engineering
Waste Plastics Are Indispensable Material In Current Day Scenario. Due To Its Fuel Properties Applications In Industrial Field Increasing Rapidly. The Aim Of This Experimentation Is To Study Fuel Oil Extraction From HDPE Plastic Waste By Catalytic Pyr
Author: Maurya V. S. | Khatale R. D. | Tarwade G. S. | Mutadak G. A. ,Patil R. S.
Read MoreOPTIMIZATION OF NEEM BIODIESEL AND ITS PERFORMANCE ON CI ENGINE
Mechanical Engineering
The Use Of Fossil Fuel Is Increasing Now A Days, Because Of Which Pollution Problems Are Increases Due To Which It Create Health Problems And Has Great Impact On Environment. So There Is Need Of An Alternative Fuel Which Is To Be Used Instead Of Diese
Author: Patil.S.R. | Patil.S.S. | Pise.V.R. | Rathod.M.M.,Tale.S.L
Read MoreEXPERIMENTAL ANALYSIS OF TRANSITION OF THERMAL ENERGY FOR DIFFERENT PCM’S IN CONCRETE WALL
Mechanical Engineering
Phase Change Material (PCM) Is A Substance Which Is Capable Of Storing And Releasing Of Energy In The Form Of Latent Heat Of Fusion During Freezing And Melting. It Has Been Used As PCM Material Because Of Its Property Of Active Temperature Compensatio
Author: P.N. Wankhade | S.P. Supekar | R.S. Sonawane | S.S. Wadhonkar, N.A. Shinde
Read MoreAPPLICATION OF MULTI ATTRIBUTES DECISION MAKING METHODS FOR SELECTION OF BLENDS OF ETHANOL WITH PETROL FOR SI ENGINE
Mechanical Engineering
The Rapid Growth Of Automobile Industries Leads To Numerous Vehicles On The Road Which Consumes Ample Amount Of Fuel And Hence Rapid Decrease In Natural Fuel. Therefore, Need Of Finding Out A Suitable Alternative Fuel Is Required. India And Other Agri
Author: Cheke K.D | Bhalerao K.B | Chaudhari R.P | Chaudhari S.V, Kamble A.G
Read MoreA REVIEW OF NANOFLUIDS AND THEIR IMPLEMENTATION FOR HEAT TRANSFER ENHANCEMENT
Mechanical Engineering
Nanofluids, Which Are The Colloidal Suspensions Of Nanaomaterials, Have Displayed Many Interesting Properties And Distinctive Features That Offer Unprecedented Potential For Many Applications Specifically In Heat Transfer Equipments. This Paper Provid
Author: Karankoti S.V | Shinde A. D | Sangewar C. N | Dhenge P. R, Panchariya S. H
Read MorePERFORMANCE EVALUATION OF VCR SYSTEM BY USING SHELL AND TUBE LSHX
Mechanical Engineering
This Paper Considers The Influence Of The Heat Exchangers To The Efficiency Of VCC Cycle. The Shell And Tube Type Heat Exchanger Will Be Used To Compare The Coefficients Of Performance Of Vapour Compression System With And Without Liquid Suction Heat
Author: Mr. Dhangar P.K. | Mr. Gadge V.D. | Mr. Darade R.K. | Mr. Dubey V.R., Prof. Kekan R.H.
Read MoreDESIGN AND DEVELOPMENT OF INDUSTRIAL SUCTION DEVICE USING COMPRESSED AIR
Mechanical Engineering
“Vacuum Producer” Is A Single Stage Design With Inbuilt Fittings For Pneumatic Connections Without Any Moving Parts. Vacuum Producer Works On A Principle That Compressed Air Is Throttled As The Air Exits The Nozzle And Is Discharged Into The Diffuser.
Author: Bhanushali P. H. | Chavhan A.P. | Bhangale K.M. | Keesari H.S
Read MoreTHERMAL PERFORMANCE OF CURTAIN WALL SOLAR SYSTEM USING NANOFLUID
MECHANICAL ENGINEERING
A Wall-integrated Solar Heating System Refers To An Architectural Design Approach That Combines Hot Water Generation With The Building's Construction System. This Combination Allows This System To Feature A Hot Water Generation Function And Become Par
Author: Mohan M. D | Ahire S. G | Doke V. P | Prof. Magar V. H.
Read MoreIMPLEMENTATION OF SUPERCHARGING ON SI ENGINE USING NATURALLY RAMMED AIR
Mechanical Engineering
Supercharger Is A Device Introduced In Two Wheelers. The Leading Problem Seen In The Bikes Nowadays Is Less Mileage And High Exhaust Emissions. This Problem Can Be Overcome By The Implementation Of Supercharger In Bikes. The Main Problem Of The Carbur
Author: Labade A. M. | Mahajan A. D. | Karpe S. S. | Mali S. M., Salunkhe S. B.
Read MoreCOMPARATIVE STUDY OF PHASE CHANGE MATERIAL FOR ENHANCEMENT OF THERMAL STORAGE IN SOLAR WATER HEATING
Mechanical Engineering
The Utilization Of Abundantly Available Solar Energy For Domestic And Industrial Applications Is Hindered Because Of Its Intermittent Nature. Thus Attempt Is Made To Utilize This Energy When It Is Not Available. The Aim Of This Experimentation Is To S
Author: Gaikwad S. M. | Bhase A. D. | Amrutkar S. A. | Pawar B. A., Bendhale A. M.
Read MoreEXPERIMENTAL INVESTIGATION OF HEAT EXCHANGER FOR WASTE HEAT RECOVERY THROUGH HVAC SYSTEM
Mechanical Engineering
In Last Few Decades, The Energy Demand From The World Is Increased Enormously. So, Regeneration And Conversion Of One Form Of Energy Into Another Useful Form Of Energy Is Becomes A Necessity Of Today's Life. This Paper Work Explains Recovery Of Waste
Author: Yewale G. P. | Shinde R. K. | Waykar A. M. | Gunjal A. A., Kamthane C. R.
Read MoreA REVIEW ON BEST SUITABLE METHOD FOR BIOGAS PURIFICATION
Mechanical Engineering
The Biogas Derived From The Biomass Is Commercially Used As Fuel. But It Is Impure As It Contains 30- 45% Of CO2, 0.005-2% Of H2S, Traces Of Water Vapour And Remaining Methane Which Is Only The Combustible Component In The Biogas. As CO2 Reduces The V
Author: S. C. Labde | S. D. Kore | R. L. Patil | S. N. Patil, S. M. Mulye
Read MoreCOMPARATIVE STUDY OF PERFORMANCE AND OPERATING CONDITION OF H2ICE AND SI ENGINE
Mechanical Engineering
Hydrogen Is A Very Efficient & Clean Fuel. It Provides An Emission Free Transportation Fuel.H2ICE Is An Engine Which Uses Hydrogen Gas To Produce Power. Hydrogen Is Expected To Beone Of The Most Important Fuel In The Near Future To Meet Thestringent E
Author: Kakde Santosh | Jadhav Amolratn | Dindge Shrikrishna | Kamble Vijaysinh, Shinde V. V.
Read MoreIMPROVED PERFORMANCE OF VARS USING MINICHANNEL CONDENSER
Mechanical Engineering
A Considerable Part Of The Energy Generated By An Automotive Internal Combustion Engine And In The Boiler Power Plant Is Wasted As Heat In The Exhaust System. This Wasted Heat Could Be Recovered And Can Applied To The Vapour Absorption Systems. The Ex
Author: Sagar Wankhede | Shubham Shinde | Sumit Nagothkar | Dhananjay Hingmire, Atul Yadav
Read MoreA REVIEW ON TECHNICAL DEVELOPMENT OF AIRSHIPS AND ITS APPLICATION
Mechanical Engineering
The Research And Development Of Distinct Types Of Airship Are Mentioned In This Paper. The Major Constructional Details Of Non-rigid, Semi-rigid And Rigid Airships Are Initially Introduced. It Is Followed By The Description Of Unconventional Airship S
Author: A. A. Dhawale | A. D. Dhatrak | N. P. Godse | S. S. Hengne, S. M. Mulye
Read MoreDESIGN AND DEVELOPMENT OF ABSORPTION AIR-CONDITIONING SYSTEM FOR PASSENGER CAR
Mechanical Engineering
Now A Day’s Engineers Are Looking For The Recovery Of The Waste Heat That Came From The Exhaust Of The Engine And Other Source. The Absorption System Is Essentially An Air Conditioning System That Will Use The Heat From The Exhaust To Create Cooling E
Author: Dakhane A. S | Dhangar N. M | Pillai S. S | Rana A. R, Ogale A. P
Read MoreEFFICIENCY IMPROVER KIT FOR IC ENGINE
Mechanical Engineering
Today The World Is Facing Three Critical Problems: (1) High Fuel Prices, (2) Climatic Changes, And (3) Air Pollution. Experts Suggest That Current Oil And Gas Reserves Would Suffice To Last Only A Few More Decades. Bio-renewable Liquids Are The Main S
Author: Gosalwad Dhananjay | Abhishek Ranjan | Suryavanshi Akash | Biju Deka, Assf. Prof. B. R. Chaudhari
Read MoreDESIGN AND FABRICATION OF 2KW LIBR-H2O ABSORPTION AIR CONDITIONING SYSTEM
Mechanical Engineering
The Objective Of This Paper Is To Design And Fabricate A LiBr-H2O Vapour Absorption System (VARS) For Airconditioning Purpose. Design Of Various Components Like Evaporator, Condenser, Heat Exchanger Used In System Will Be Shown And Their Capacity Will
Author: Banola R. C. | Tatte B. B | Chauhan H. S. | Shet S. S.,Mathpati S. S.
Read MoreEMISSION CONTROL IN S.I ENGINE USING BIO-FUELS BY CATALYTIC CONVERTER
Mechanical Engineering
Nowadays Pollution Is The Major Concerns In Our Day To Day Life. Pollution Has Many Adverse Effects On The Environment Which Needs To Be Controlled. S.I Engine Is One Of The Primary Modes Of Increasing Pollution. There Are Various Methods To Control T
Author: Prof. Wasnik A. R, | Ramteke A. D | Jondhale K. P | Salaskar G. R, Inani K.
Read MoreMANUFACTURING THE EXPERIMENTAL SET-UP AND ANALYZING THE ENHANCEMENT IN HEAT TRANSFER RATE BY VARIOUS PASSIVE METHODS
Mechanical Engineering
Transfer Of Heat Is A Very Common Natural Phenomenon. The Study Of Heat Transfer Has Helped Us Construct Various Technologies. From An Engineer’s Point Of View The Term ‘rate Of Heat Transfer’ Holds A Very Special Place. This Project Undertakes The Ta
Author: Pandey S.C. | Lopes N.N. | Yadav R.S. | Wagh R.S., Chavan S.V.
Read MoreGEOTHERMAL HEAT PUMP SYSTEMS
Mechanical Engineering
A Geothermal Heat Pump (ground Source Heat Pump) Is A Central Heating And/or Cooling System Which Transfers Heat To Or From The Ground. Earth Is Used As A Heat Source (in The Winter) And A Heat Sink (in The Summer). The Shallow Ground Temperature Is M
Author: Chaitrali P. Salgaonkar | Rujuta S. Kulkarni | Dheeraj D. Kulkarni | Dr. V. R. Deulgaonkar, Prof. S. N. Satpute
Read MoreEXPERIMENTAL INVESTIGATION OF THE CAPILLARY TUBES OF SAME LENGTH WITH DIFFERENT DIAMETER ON THE VCR SYSTEM
Mechanical Engineering
In This Paper, The Performance Analysis Of The Capillary Tube Of Different Diameter And Same Length Was Studied Where The Cooling Of Fixed Mass Of Water From 20oC To 5oC Is Done Using VCR System. It Is Observed From The Software The Capillary Of Diame
Author: Bhandarkar S.L. | Gavali G.G. | Kale A.B. | Bhagwat P.S.
Read MorePROCESSING OF BIODIESEL AND COMPARISON OF STORAGE PARAMETERS
Mechanical Engineering
Diesel Is Considered As One Of The Major Source Of Energy Especially In Transportation. But Due Its Emission And Toxic Properties, It Is Becoming Difficult For Diesel To Fit Under The Specified Norms. Biodiesel Overcomes Major Drawbacks Of Diesel With
Author: Swapnil Bansode | Vrushank Balutkar | Vaidehi Bhave | Vedang Hande, S.V.Chavan
Read MoreHEAT TRANSFER ENHANCEMENT IN AUTOMOBILE RADIATOR USING COPPER NANOFLUIDS
Mechanical Engineering
In This Paper, Forced Convective Heat Transfer In A Water Based Nanofluid Has Experimentally Been Compared To That Of Pure Water In An Automobile Radiator. Different Concentrations Of Nanofluids In The Specific Range Have Been Prepared By The Addition
Author: Prof. Ugare V. M. | Sable S. M., | Patil P. N., | Rathod V. R., Magji S. A.
Read MorePRODUCTION OF CHICKEN FAT BIODIESEL AND ITS BLENDS
Mechanical Engineering
As Per The Current Situation, Industrial And Transportation Sector Have A Large Utilization Of Fuels. An Internal Combustion Engines Particularly The Compression Ignition (CI) Play A Major Role In Transportation, Industrial, Power Generation And The A
Author: Pratik Mundane | Sumit Sable | Shubham Chaudhry | Priyanka S, Narode A.R.
Read MoreREVIEW OF CHALLENGES IN DESIGNING FUEL INDUCTION SYSTEM FOR HYDROGEN FUELLED ENGINE
Mechanical Engineering
Considering The Limited Fossil Fuel Reserves, The Hydrogen Has Been Considered As One Of The Substitution Fuel For Spark Ignition Engine. Hydrogenfulfils The Required Needs Of SI Engine And It Is One Of The Renewable And Clean Burning Fuel. It Has Bee
Author: Gutte K. P. | Fulari S. P. | Jadhav D. V. | Gonate D. N., Shinde V. V.
Read MorePERFORMANCE EVALUATION OF EVAPORATIVE ENGINE COOLING USING VCR SYSTEM
Mechanical Engineering
An Internal Combustion Engine Produces Power Burning By Fuel Within The Cylinders; However, Only About 30% Of The Heat Is Converted To Useful Power. Thirty To Thirty Five Per Cent Of The Heat Produced In The Combustion Chambers By The Burning Fuel Is
Author: Kachale D.S. | Indore P.D. | Karale V.R. | Ingale G.S., Mehtre D.N.
Read MoreDESIGN AND ANALYSIS OF A CPU HEAT SINK USING METAL FORM TO ENHANCE HEAT TRANSFER RATE
Mechanical Engineering
Metal-foam Heat Sinks Made Of Copper Or Aluminium Have Proven To Be Appropriate For The Cooling Of High Power Electronic Components With Excellent Cooling Performance Under Forced Convective Conditions. The Open-cell Metal Foam Structure Has The Desir
Author: Waghmare K.R | Yuvraj K.V | Ashutosh K | Vikash K.S. Prof.Patil. R.S
Read MoreEXPERIMENTAL ANALYSIS OF EFFECT OF BIODIESEL ON PERFORMANCE AND EMISSION OF I.C.ENGINE
Mechanical Engineering
Today In This Fast Developing World The Need Of Various Transportation System Is Increasing Day By Day, In The Result Of This Number Of Vehicles And Engines Are Increasing, But The Conventional Fuel Used In The Vehicles (like Diesel And Petrol) Are Li
Author: Kakade K.A. | Kambale A.M. | IngaleV.R. | Kandalkar S.S, Karande A.V.
Read MoreREVIEW ON FAILURE ANALYSIS OF SINGLE CYLINDER DIESEL ENGINES CRANKSHAFT
Mechanical Engineering
The Crankshaft Is An Important And Large Component Of An Engine. The Function Of Crankshaft Is To Convert Reciprocating Displacement Of The Piston Into A Rotary Motion. The Objective Of This Study Is To Review Failure Analysis Of Single Cylinder Diese
Author: Mr. Patil S.P. | Mr. Pimpale R.S. | Mr.Avhad R. V. | Mr.Shirsat B. S. ,Prof. Jawale P.P.
Read MoreREVIEW PAPER ON HORIZONTAL AXIS WIND TURBINE (HAWT) GEARBOX DESIGN AND ANALYSIS
Mechanical Engineering
Horizontal Axis Wind Turbine(HAWT) Is One Of The Most Renewable Energy Sources. In This Paper We Are Designing, Analysing And Manufacturing HAWT Gear Box. In This Paper We Are Designing Gearbox According To Brendan Speechleys Methodology. Analysis Is
Author: Kumbharkar V.A | Shivnekar Sagar | Shinde Somnath | Thorat Vikrant
Read MoreSHIFT QUALITY OF AUTOMATED MANUAL TRANSMISSION: A LITERATURE REVIEW
Mechanical Engineering
In Last Few Years, Automobile Manufacturers Are Improving Performance Of Transmission System Thereby Improving Gearshift Quality. This Also Includes Reducing The Amount Of Clutch Operations And Repeated Gear Shifting Efforts In Manual Transmission. Au
Author: S. M. Bannur
Read MoreEXPERIMENTAL INVESTIGATION OF PERFORMANCE AND EMISSION CHARACTERISTICS OF CI ENGINE USING GRAPHENE NANOPARTICLES AS AN ADDITIVE IN BIODIESEL
Mechanical Engineering
An Experimental Investigation Were Carried Out To Determine Performance And Emission Characteristics Of Diesel Engine Using Diesel, Honge Oil Methyl Ester [HOME] And Nanoparticles Blended Biodiesel Fuels. The Base Line Data Was Generated Using Neat Di
Author: Vishwajit A. Bhagwat | Jayshri S. Patil | Shriram Shashtri
Read MoreA REVIEW ON CAR BONNET INTERNAL RIB STRUCTURE
Mechanical Engineering
Car Bonnet Consist Of The Outer Panel And Inner Stiffener Panels And Reinforcement Members Placed There Between To Increase The Strength Of Said Panel In Localized Area. Bonnet Is A Main Component Of Front Portion Of The Car Which Is Used For Many Pur
Author: Ms. Anita Deshpande | Ms. Prachi Ahivale | Mr. Vikram Raut
Read MoreEXPERIMENTAL ASSESSMENT ON COCONUT SHELL POWDER AS AN AGGREGATE MATERIAL FOR CONSTRUCTION BRICKS
Mechanical Engineering
Coconut Shell Is An Agricultural Waste And Is Available In Large Quantities Throughout The Tropical Countries Of The World, Which Are Generally Thrown Away Or Burnt As A Means Of Solid Waste Disposal. Hence There Is Need Of Development Of New Method O
Author: Pranav Datar | Dr. Vikas Shinde
Read MoreEFFECT OF DIFFERENT ENVIRONMENTAL CONDITIONS ON MOISTURE ABSORPTION OF GFRP LAMINATES- A COMPARATIVE STUDY
Mechanical Engineering
The Designers Are In Search Of Materials Which Withstand The Effect Of All Variety Of Loading Conditions And At The Same Time At A Very Competitive Price. The Composites Are Complex Material And Their Properties Vary As The Constituents Change In Any
Author: Parmeshwar Patil | S. B. Kivade | Prashant Nadumani
Read MoreDESIGN OF BIODIESEL PLANT USING TRANSESTERIFICATION OF NON-EDIBLE OIL SEEDS
Mechanical Engineering
Self Reliance Of Fossil Fuels Are Increasing At Faster Rates, Nearly 70% Of Nations Economy Depends Upon Transportation Thereby Depleting Fossil Fuels At Faster Rates. Additionally Subsequent Increase In Greenhouse Gases Emissions And Stringent Emissi
Author: Vikrant D. Nichit | V.V.Shinde | S.B.Chavan
Read MoreA COMPREHENSIVE REVIEW ON SOLAR COOKERS
Mechanical Engineering
In This Paper, A Thorough Review Of The Available Literature On Solar Cookers Is Presented. The Review Covers Detailed Description Of Various Types Of Solar Cookers, Parameters Which Affects The Performance Of Solar Cookers Such As Mirrors, Glazing, A
Author: Mr. Sushant Patil | Mr.Vivek Ugare | Abhinandan Agare | Dyaneshwar Shinde
Read MoreEFFECT OF SURFACE PRE-TREATMENT, TEXTURED PATTERN ON TI6AL4V ALLOY SUBJECTED TO FLUCTUATING SERVICE CONDITIONS
Mechanical Engineering
Due To The Demand For Light-weight Constructions To Reduce Fuel Consumption Especially In The Aerospace And Automotive Industries, Titanium Alloys Stand Out As The Conventional Choice For Light Weight Structures. Adhesive Bonding Of Titanium Is An App
Author: Mr.Nitesh S Hirulkar | Mr.P.N.Jaiswal | Mr.Vivek M Ugare | Mr.Sharad R Meshram
Read MoreREVIEW ON STUDY AND ANALYSIS OF DRUM BRAKE TO CONTROL SQUEAL NOISE
Mechanical Engineering
The Stringent Competition In Automobile Market Of Passenger Vehicle Segment Exists On Account Of With Respect To Critical Attributes Like Vehicle Comfort, Fuel Efficiency And Cost. NVH (Noise, Vibration And Harshness) Is One Of Critical Attribute And
Author: Kulkarni P. D | Phatak A. A | Sayare R. S
Read MoreREVIEW AND ASSESSMENT OF HYDROGEN PRODUCTION METHODS FOR ALTERNATIVE FUEL AND BETTER SUSTAINABILITY
Mechanical Engineering
Due To Rising Use Of Automobiles And Other Automotive Machines, The Fossil Fuel Consumption Is Increasing Rapidly. The Fossil Fuel Reservoirs, Hence, Are Under Great Stress And The Scenario Is Likelier To Aggravate Than Mitigate. The Need To Discover
Author: A. V. Koshti | S. S. Pawar | B. P. Naik | S. V. Krankoti
Read MoreANALYSIS OF FATIGUE CRACK GROWTH RATE IN SPUR GEAR DUE TO BENDING FATIGUE
Mechanical Engineering
A Computational Model For Determination Of Crack Propagation Rate Of Spur Gears In Regard To Bending Fatigue In A Gear Tooth Root Is Being Presented. The Fatigue Process Leading To Tooth Breakage Is Represented As Crack Propagation Period. The Crack P
Author: Bhargav Desai | M.A.Mohite
Read MoreDESIGN AND ANALYSIS OF EOT CRANE HOOK FOR CIRCULAR AND TRAPEZOIDAL SECTIONS
Mechanical Engineering
In This Project The Design Of EOT Crane Hook Has Been Carried Out. The Dimensions Of The Hook Have Been Determined For A Load Capacity Between 12.5 Tonnes. Various Dimensions For Cross Sections Of Various Shapes For Crane Hook Have Been Found. After T
Author: Chavan Bhushan R | Phadnis Swapnil S | Kulkarni P.D
Read MoreCROSS SECTIONAL ANALYSIS OF EOT CRANE HOOK
Mechanical Engineering
Crane Hooks Are One Of The Important Components Which Are Used To Transfer Materials Having Heavy Loads, Mainly In Industries. Crane Hooks Are Liable Components Subjected To Failure Due To Stress In Accumulation Of Heavy Loads. The Design Parameters F
Author: Phadnis Swapnil S | Chavan Bhushan R | Mohite M.A
Read MoreSTUDY OF STATIC AND DYNAMIC ANALYSIS OF COMPOSITE MONO LEAF SPRING
Mechanical Engineering
The Automobile Industry Has Shown Increased Interest In Replacement Of Steel Spring With Composite Mono Spring Due To High Strength To Weight Ratio. A Leaf Spring Is A Simple Form Of Spring, Commonly Used For The Suspension In Wheeled Vehicles. Leaf S
Author: Vaibhav M Pukale
Read MoreDESIGN, ANALYSIS AND OPTIMIZATION OF AXLE AND CHASSIS OF TRACTOR TROLLEY USING FEA AND EXPERIMENTATION
Mechanical Engineering
In India, Various Small Scale Industries Is Adopting The Crude Methodologies For Designing And Manufacturing The Machine Components. One Such Industry Producing Tractor Trolleys For Agricultural Use Has Been Identified For This Study. In The Present M
Author: Patil Sunil R | Kulkarni P.D
Read MoreIDENTIFICATION AND MEASURING OF WEAR IN BUCKET TEETH EXCAVATOR BY ASTM G65 STANDRED
Mechanical Engineering
Now A Day Constantly And Rapidly Enhancement Rate Of Industry Of Earth Moving Machines Is Assured Through The High Performance Construction Machines With Automation And Complex Mechanisms. An Excavator Bucket Tooth Is An Attachment For Heavy Equipment
Author: Harshal B. Khonde
Read MorePERFORMANCE OF 3- CYLINDER 4 STROKE SI ENGINE UNDER THE INFLUENCE OF PERMANENT MAGNETIC FIELD
Mechanical Engineering
In Recent Years Due To Excessive Use Of Fossil Fuel In A Vehicular And Industrial Purpose Its Stock Will Almost Come To End Within Few Decades. Hence There Are So Many Efforts Towards The Improving Power Output And Reducing Emissions From IC Engine Ta
Author: Prof. Ugare V.M | Shinde M.D | Sarade A.B. | Sakolkar P.M., Raykar D.D
Read MoreEXPERIMENTAL INVESTIGATION AND PID CONTROL IMPLEMENTATION ON VOICE COIL ACTUATOR USING FLEXURAL BEARING
Mechanical Engineering
Flexural Mechanisms Are Highly Advantageous As Compared To Traditional Rigid Body Structures Where Point Accuracy And Precision Positioning Is Inevitable Ranging In Microns. To Accomplish Clear And To The Point Movement, We Develop A New Mechanism Of
Author: Sharad S. Mulik | Suhas P. Deshmukh | Mahesh S. Shewale
Read MoreTO DESIGN A SPIRAL AERATOR SYSTEM FOR THE EARTHEN MAKING PROCESS TO INCREASE OUTPUT
Mechanical Engineering
Work Is The New Innovation In Existing Vertical Aerating System. To Make Feasible Combination Of Aerating And Feeding In Common Machine, It’s A Bigger Subassembly In This Process Which Gives Simplest But Effective Machine Work For The Application. Des