Volume 5 - Issue 9
Published in September 2019 | Research Archive
Research Articles
Explore peer-reviewed scientific studies published in this issue.
SURVEY OF ROBOTICS USING ARTIFICIAL INTELLIGENCE
Despite A Very Strong Synergy Between Robotics And Artificial Intelligence At Their Starting Phase, The Two Fields Progressed Apart In The Following Decades., We Are Witnessing Interest In The Fertile Domain Of Embodied Machine Intelligence(Robotics... Read more
SATELLITE COMMUNICATION
Satellite Communication Is The Moral Fiber Of Wireless Transportation, And Worldwide Position System A Satellite Is Parallel To A Satellite, But Is Stationed In The Stratosphere Relatively Than In Path. The Satellite Is Intended To Take Convinced P... Read more
Healthcare Sector: Cross Country Analysis, Correlation Study and Assessment of Investment Opportunities in the Context of Indian Market
The Research Objective Was To Unveil Various Aspects Of Healthcare Sector That Includes Comparative Cross-country Analysis With Special Focus On Globally-accepted Key Indicators. The Subsequent Comparison Of Developing Nations With OECD Countries Ref... Read more
EFFECTIVENESS OF PRAGNA ABHIGAM IN LOWER PRIMARY SCHOOLS
EVALUATION OF CLOUD COMPUTING TECHNOLOGY
Cloud Computingis Basically An Internet-based Network Made Up Of Large Number Of Servers-mostly Based On Open Standards, Be A Model And Inexpensive. It Implies A Serviceoriente Architecture A Through Offering Software And Platforms As Services, Red... Read more
Cluster Head Selection Using Balancing the Load
An Emerging Class Of Wireless Sensor Network (WSN) Applications Involves The Acquisition Of Large Amounts Of Sensory Data From Battery Powered, Low Computation And Low Memory Wireless Sensor Nodes. This Paper Focuses On Minimizing And Optimizing Ener... Read more
DESIGN AND IMPLEMENTATION OF NOMA WITH SUCCESSIVE SIGNAL DETECTION AND EQUALIZATION FOR 5G NETWORKS
With Increasing Number Of Users And Increased Bandwidth Requirement For Each User Due To Multimedia Applications, Need For More Effective Multiplexing Techniques Have Arisen. Non Orthogonal Multiple Access Of NOMA Has Emerged As A Key Contender For T... Read more
A SURVEY ON NON-ORTHOGONAL MULTIPLE ACCESS (NOMA) FOR 5G SYSTEMS AND BEYOND
This Paper Presents A Comprehensive Survey On Non-Orthogonal Multiple Access For 5G Systems And Onwards. With The Advent Of 5G Communications, Increasing Number Of Users, Increased Bandwidth And Data Requirement Yet Limited Bandwidth Availability Hav... Read more
DESIGN AND DEVELOPMENT OF AUTOMOTIVE INTERIOR PLASTIC MAP POCKET FOR MULTI-MATERIAL 3D PRINTING
The Present Scenario Demanding Increase Of Additive Manufacturing Products For Various Application In Different Fields Has Gained New Demands Through Various Industries. The Parts Manufactured By Additive Manufacturing Are Used In Various Fields, Tho... Read more
A STUDY ON FAILURE OF FLIPKART AND SNAPDEAL MERGER
In The Todays Competitive Business World, Mergers And Acquisitions Is Used As A Corporate Action Which Alters The Share Capital Structure And Changes The Number Of Shares Of The Company. Mergers And Acquisitions Will Be Forced On A Company Because Of... Read more
TOUCHLESS TOUCHSCREEN
Touch Screen Displays Are Ubiquitous Worldwide. Frequent Touching A Touchscreen Display With A Pointing Device Such As A Finger Can Result In The Gradual De-sensitization Of The Touchscreen To Input And Can Ultimately Lead To Failure Of The Touchscre... Read more
PERFORMANCE ASSESSMENT OF URBAN SEWAGE TREATMENT PLANT USING FUZZY RULE BASE APPROACH
Performance Assessment Of Wastewater Treatment Plant (WWTP) Is Carried Out To Know Performance Of Different Units In Overall Treatment Plant. Influent And Effluent Characteristics Were Gathered And Compared With The Standards Lead State Pollution Con... Read more
ANALYSIS OF NEW MODEL AIRCRAFT WING DESIGN TO IMPROVE FATIGUE
This Project Is Aimed Towards Addressing Certain Set Of Objectives In A Realistic Manner As Possible. In Any Aircraft, Wings Are The Major Lift Generating Aerodynamic Structure. It Accounts For Carrying Major Portion Of Aircraft Weight, Structural St... Read more
5G ANALYSIS
5G (5th Generation Mobile Networks) Stand For The Next Major Phase Of Mobile Telecommunications Standards Beyond The Current 4G/IMT Advanced Standards. 5G Has Speeds Further What The Present 4G Can Provide. From Generation 1G To 2.5G And From 3G T... Read more
EXPERIMENTAL STUDY ON CONCRETE WITH PARTIAL REPLACEMENT OF GRANITE DUST AND WASTE CUDDAPAH STONE AS FINE AND COARSE AGGREGATES
Concrete Is A Major Building Material Which Is Extremely Versatile And Used For All Types Of Structures. Due To The Rapid Growth In Construction Activity, The Consumption Of Concrete Is Increasing Every Year. This Results In Excessive Extraction Of N... Read more
RELATION OF DEMOGRAPHIC PROFILE OF CUSTOMERS AND THEIR ONLINE SHOPPING BEHAVIOUR
Online Shopping Is A Recent Phenomenon In The Field Of E-business And Is Definitely Going To Be The Future Of Shopping In The World. Most Of The Companies Are Running Their Websites To Sell Their Products/services Online. There Is Hardly Any Product,... Read more
A Realistic Approach to Detect Malware using Binary Analysis and Machine Learning
Malware Is A Computer Program That Is Aimed To Breach Computers Without Owner’s Authorization. Bulk Of Malwares Are Increasing Every Year. Antivirus Providing Companies Are Receiving Millions Of Malwares Daily, So Discovery Of Malwares Is Difficult A... Read more
An Analysis to Detect Malware using Machine Learning
In Recent Times, Malware Has Progressively Turn Out To Be A Dangerous Threat To Computer Systems And Mobile Devices While Traditional Software Inventions Like Antivirus And Malware Have Not Been So Effective In Protecting From The Ever-evolving An... Read more
A STUDY ON PERFORMANCE OF PROJECT MANAGEMENT TECHNIQUES ON MULTI STOREY BUILDING
Construction Industries Are Facing A Lot Of Difficulties These Days. The Success Of Any Construction Project Is Dependent On Delivering The Project With Minimal Time And Cost Overrun. A New Management System Known As Lean Construction Has... Read more
Daily attendance system using Android Mobile GPS and face Recognition
“Mark Your Attendance “a Punching Attendance Using Traditional Way Is Still A Time Taking Process In Offices, School And Colleges. Professors, Teachers, Student, Employees Invest Their Precious Time In This Process. Internet Of Things Became An Imp... Read more
NUMERICAL INVESTIGATION OF THE FORCED CONVECTION USING NANO FLUID
The Performance Of Heat Exchangers Especially For Single Phase Flows Can Be Enhanced By Many Augmentation Techniques. One Of The Most Popular Method Used Is A Passive Heat Transfer Technique. Researchers Have Been Quite Active In The Search Of Novel... Read more
NUMERICAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT IN CIRCULAR PIPE USING VARIOUS RIB GEOMETRIES
Heat Transfer Enhancement Techniques Can Be Divided Into Two Categories Passive And Active. In Passive Heat Transfer Enhancement An Object Which Does Not Use External Energy, Such As Groove Inside The Tube, Has The Duty Of Increasing The Heat Transfe... Read more
COMPUTATIONAL HEAT TRANSFER ANALYSIS OF FORCED CONVECTION FOR NANOFLUIID IN A COMPACT PIPE
The Current Need For Heat Transfer Using Forced Convection Is Growing Day By Day Since The Use Heat Is Used Rapidly In Many Industrial Applications Like Power Generation , Food Processing Aerospace And Defense The Vast Research By Engineers Now A Day... Read more
CFD ANALYSIS OF NATURAL CONVECTION IN ANNULAR ELLIPTICAL CYLINDER
Natural Convection Heat Transfer From A Vertical Cylinder With Elliptical Fins Has Been Studied Using CFD Analysis By Varying The Rayleigh Number (Ra) In Both Laminar (104 ≤ Ra ≤ 108) And Turbulent (1010 ≤ Ra ≤ 1012) Regimes. The Computations Were Ca... Read more
QUALITY INSPECTION OF FRUITS AND VEGETABLES USING IMAGE PROCESSING
The Paper Focuses On A New Approach Towards The Inspection Of Quality And Safety Of Various Fruits And Vegetables. It Is A Real-time Inspection System That Is Implemented On MATLAB Software. The System Is Interfaced With ATmega328 Microcontroller Usi... Read more
RECTILINEAR CROSSING NUMBER OF ZERO DIVISOR GRAPH
In This Paper, We Evaluate The Rectilinear Crossing Number Of A Zero Divisor Graph In A Commutative Ring. The Rectilinear Crossing Number Of G Is Denoted By Rcr(G). Then The Definition Becomes Cr (G) ≤Rcr(G). Here We Observed The Study Of Theorems Ba... Read more
AN ECOFRIENDLY GEOPOLYMER CONCRETE BY USING FLY ASH AND GGBS AS A REPLACEMENT OF CEMENT AND NYLON CRYSTAL AS REINFORCEMENT
Concrete Has Occupied An Important Place In Construction Industry In The Past Few Decades And It Is Used Widely In All Types Of Constructions Ranging From Small Buildings To Large Infrastructural Dams Or Reservoirs. Cement Is Major Component Of Concr... Read more
ANALYTICAL INVESTIGATION AND EFFECT OF OPTIMUM TILT AND AZIMUTH ANGLE ON DC PRODUCTION FOR SIKAR, INDIA
Solar Energy Is Largest Alternate Source Of Energy On The Earth. Among All Other Renewable Energy, Solar Energy Has Been An Important As It Has Many Features Like Minimum Maintenance, Easy Use And Small Payback Etc. The Major And Important Issue Is T... Read more
CLUSTERING USING PERFORMANCE ANALYSIS IN EDUCATIONAL DATA MINING
Data Mining Techniques Are Used To Extract Useful Knowledge From Raw Data. The Extracted Knowledge Is Valuable And Significantly Affects The Decision Maker. Educational Data Mining Is An Emerging Discipline, Concerned With Developing Methods For Expl... Read more
MAGNETIC SATURATION ANALYSIS OF MAGNETORHEOLOGICAL FLUID DAMPER
Magneto-Rheological (MR) Dampers Are Semi- Active Control Devices That Use MR Fluids To Produce Controllable Dampers. The Advantage Of MR Dampers Over Conventional Dampers Are That They Are Simple In Construction, Compromise Between High Frequency Is... Read more
ANALYSIS OF LINEAR AND ROTARY FLEXURAL MECHANISM
In Today’s Fast Moving And Highly Competitive World, Everyone Wants Precise And Accurate Results. In The Fast Growing Mechanical And Mechatronic World, The Dire Need Of Precision Has Led To The Development Of New Types Of Mechanisms And These Are Ser... Read more
ARDUINO BASED WASTE SEGREGATION SYSTEM USING ROBOTIC ARM
Robotic Arm For Waste Segregation Is Proposed For Segregating The Wastes As Metal And Other Wastes. People Are Throwing About 79.3 % Of Waste Which Can Be Recycled. Solution To This Is To Use An Automatic Waste Segregation System. This Paper Proposes... Read more
PREDICTING ELECTRICITY LOAD FOR LIGHT ENERGY CONSUMPTION IN A HOUSE USING MACHINE LEARNING ALGORITHM
Predicting Energy Consumption Is An Area Has Become An Important Field Of Research. The Purpose Of This Research Work Is To Find The Relation Between The Usage Of Light Energy Consumption With Outside Temperature And Humidity. In This Work, Time Seri... Read more
FORECASTING ELECTRIC ENERGY CONSUMPTION IN A HOUSE USING ARTIFICIAL NEURAL NETWORK
Electricity Plays A Significant Role In Human Life. Human Beings Rely On Electrical Appliances In Day-to-day Activities. Electrical Appliances Includes Electric Stove, Washing Machine, Refrigerator, Air Conditioner, Fan, Lights, Electric Bi-cycle, El... Read more
A STUDY ON THE PERFORMANCE OF MICROFINANCE INSTITUTIONS IN INDIA, FOR BALANCED ECONOMICAL GROWTH
One Of The Greatest Challenges Before The Indian Sub- Continent Which Accommodates More Than One-third Of The Population Is Poverty. India, One Of The BRIC Nations With More Than 1.2 Billion Population Is Seen By Many Developed Countries As An Emergi... Read more
BATTERY SWAPPING STATION AN ALTERNATIVE TO CHARGING STATION
This Paper Tries To Find Out Challenges With Batteries Charging Station Issue And How Battery Swapping Station (BSS) Is Better Option To Match Speed Of Charging. Under Faster Adoption And Manufacturing Of Electrical Vehicles (FAME) Program, Govern... Read more
TOTAL QUALITY MANAGEMENT (TQM) IN CRANE SERVICE COMPANY: PURCHASE DEPARTMENT
The Study Is Carried Out For Analysis Of Total Quality Management (TQM) Implementation In ABC Crane Service Company. This Origination Is Already An ISO 9001 Certified Origination And Planning To Implement The TQM Philosophy And Best Follow The TQM To... Read more
IMPACT OF ONLINE ADVERTISING AND PROMOTION ON SALES
The New Era Of Internet And Online Media Has Somehow Indistinct The Impact Of Promotion And Advertising As The Intention Is To Reach Out To Audience And To Increase Sales. Advertising Is Basically Used To Increase Sales And Reputation Of The Institut... Read more
A CONTEMPLATE ON INTERNET OF THINGS - ARCHITECTURE, APPLICATIONS
Internet Of Things Has Become A Actuality. It Can Be Defined As Things Which Are Affinity To The Internet. IOT Is Actually A Combination Of Internet With RFID’s, Various Sensors (like Ambient, Wearable)and Smart Objects (things) Around Us. The I... Read more
CREDIT CARD FRAUD DETECTION USING FREQUENT PATTERN MINING USING FP-MODIFIED TREE AND APRIORI GROWTH
The Last Few Years Have Seen A Major Increase In The Number Of Credit Card Users. This Has Brought Into Limelight The Need To Study Users’ Access Patterns To Bring To Notice The Usage Patterns Of Fraudulent Users. Data Mining Is One Such Field Which... Read more
IMAGE TO SPEECH CONVERSION WEBSITE
The Traditional Way Of Reading A Book Is Through A Printed Copy. It’s Not Possible To Carry A Physical Copy Of A Book Everywhere, That’s When E-books Came In Handy. Printed Books As Well As E-books Affect The Eyes. Visual Impairment Is One Of The Big... Read more
SENTIMENT ANALYSIS OF MOVIE REVIEWS USING HETEROGENEOUS FEATURES
Data Classification Is Highly Significant In Data Mining Which Leads To A Number Of Studies In Machine Learning With Preprocessing And Algorithmic Technique. Class Imbalance Is A Problem In Data Classification Wherein A Class Of Data Will Outnumber A... Read more
SURVEY ON CLOUD STORAGE DATA SECURITY
Cloud Computing Is Next Generation Computing Technology With The Dynamic Capabilities Of Adding New Resources And Services As Per User Demand And Requirement. Cloud Computing Is Fast Growing Technology Which Facilitates More And More Users And Organi... Read more
TASK SCHEDULING IN CLOUD PLATFORMS USING THE BAT-PSO HYBRID APPROACH
Task Scheduling Is The Process Of Assigning Tasks To Different Virtual Machines Over Cloud Based Servers With An Aim To Optimize The Resource Utilization For Cloud Based Platforms. Task Scheduling Is Generally A Complex Task Often Leading To The Solu... Read more
A SURVEY AND TAXONOMY ON TASK SCHEDULING IN CLOUD COMPUTING PLATFORMS
Cloud Computing Can Be Thought Of As A Virtualization Based Approach For Rendering Various Types Of Services To Remote Computers On Demand. The Services Include Software, Hardware Or Even Rendering Platform For Clients. Task Scheduling In Cloud Based... Read more
A NEW APPROACH FOR TRACKING OBJECT IN VIDEOS
In Recent Days, Capturing Images With High Quality And Good Size Is So Easy Because Of Rapid Improvement In Quality Of Capturing Device With Less Costly But Superior Technology. Videos Are A Collection Of Sequential Images With A Constant Time Interv... Read more
DEFICIT IRRIGATION: FOR REDUCING AGRICULTURAL WATER USE
Deficit Irrigation Refers To The Application Of Water Below Full Crop Water Requirement (Fereres, 2007). It Is An Optimizing Strategy Under Which Crops Are Deliberately Allowed To Sustain Some Degree Of Water Deficit And Yield Reduction.The Objective... Read more
A REVIEW OF MOVING OBJECT DETECTION AND TRACKING
Detection Of Moving Object Is Important In Many Tasks, Such As Video Surveillance And Moving Object Tracking. The Continuing Research On Object Tracking In Video Sequences Has Attracted Many Researchers. Detecting The Objects Within The Video And... Read more
SEISMIC ANALYSIS OF A TALL STRUCTURE WITH FLOATING COLUMN USING ANALYSIS TOOL STAAD.PRO
According To The Size, Shape And Geometry Of Building, The Behavior Of Building At The Time Of Earthquake Dependent Critically, In General Way To How The Load Is Transfer To The Ground. In Multi-storey Building The Earthquake Load Is Dependent On The... Read more
ASSESSMENT OF A HISTORICAL STONE MASONARY STUCTURE USING ANALYSIS TOOL ETABS
Masonry Is The Oldest Building Material That Still Finds Wide Use In Today’s Building Industries. The Most Important Characteristic Of Masonry Construction Is Its Simplicity. Laying Pieces Of Stone, Bricks, Or Blocks On Top Of Each Other, Either With... Read more
DESIGN AND FABRICATION OF AUTONOMOUS WATERBIN
Autonomous Automated Waterbin Is A Machine Which Is Design And Fabricated In The Way Of Removing The Waste Materials From Water Surface And Safely Dispose From The Water Bodies. It Is A Floating – Self Balancing Waterbin Made From 80% - 100% Recycled... Read more
Impact Factor
Call For Paper
Volume 12 Issue 07
July 2026